The TDA2009 is a dual audio power amplifier hi-fi in multiwatt package, developed especially for high quality stereo applications. This application is the bridge amplification, where the two tda2009 internal amplifiers are used. The good thing about the TDA series of integrated circuits is that they are electronic components that are easy to find in electronics stores.
The TDA2009 is a class AB stereo audio power amplifier that contains two identical amplifiers capable of delivering 10W per channel.
It is designed for quality Hi-Fi stereo application which is easy to construct and has a mini mum need of external components.
It is designed for quality Hi-Fi stereo application which is easy to construct and has a mini mum need of external components.
The module has output current protection and thermal protection. This is the databook circuit which gives an excellent sound. The supply voltage required for this kit is 8 – 24V DC at 1 to 2 Amps. Maximum output power will only be obtained with a power supply of at least 20V and greater than 1.5 A, and using 4 ohm speakers.
Schematic of the power amplifier in bridge with tda2009
Suggestion of assembly of the power amplifier in bridge with tda2009
Information on the amplifier circuit in bridge with tda2009
The power supply is simple from 12 to 22 volts max. with current of 2 amperes.
Part List
Resistors
R1 2k or 2.2K
R2 1K
R3, R4 39 Ohms
R5, R6 1 Ohms
Capacitors
C1 100n – Capacitor Ceramic
C2, C3 2.2µF /25V – Capacitor Electrolytic
C4, C6, C7 220µF /25V – Capacitor Electrolytic
C5 22µF/25V – Capacitor Electrolytic
C8, C9 100n – Capacitor Polyester
Semiconductors
IC1 TDA2009
Connectors
IN Terminal block connector 2 screws – Audio input
OUT Terminal block connector 2 screws – Audio Output
POWER Terminal block connector 2 screws – Power supply
Miscellaneous
Power supply de 12 a 22VDC 2A
Heatsink to IC TDA2009
Printed Circuit Board, Welding, Wires, Box, etc.
No comments:
Post a Comment