Showing posts with label LM 386. Show all posts
Showing posts with label LM 386. Show all posts

Monday, 9 March 2020

LM386 ile 1/2 Watt ses mini amplifikatör

LM386, çalışması için çok az harici bileşene ihtiyaç duyan küçük ve pratik bir entegre 8 bacaklı amplifikatördür. Gösterdiğim devre, 20 kazanım ve 1/2 Watt'lık bir güçle “aslında anında” bir test amplifikatörü monte etmemize izin veriyor (aslında besleme voltajı ve hoparlör empedansı). Devre mono, stereo versiyonu için sadece bir ama çift olması gereken potansiyometre hariç iki kişilik her şeyi oynamanız gerekiyor. Uğultuyu önlemek için, iyi filtrelenmiş bir güç kaynağı ile beslemenizi tavsiye ederim.




Tuesday, 3 March 2020

An LM386 Powered Crystal Radio in an Altoids Smalls Tin

Last year I was designing an Arduino powered doorbell for my new home, and I reached for the trusty LM386 to build the audio amplification stage.  But, at my new QTH (a high elevation in a major city with line of site radio towers in the distance) the LM386 was not only amplifying the doorbell tones, it was also pulling in a nearby AM radio station!  Although this was a major annoyance while designing the doorbell, I wanted to revisit the LM386 in the future as a basic radio receiver.



If you live in a location like me, then the following basic circuit may pick up the strongest local radio station, or you may hear a 60Hz buzz from your power lines, or you may hear nothing at all.  Try it at night for the best results.



Friday, 20 September 2019

LM386 Audio and RF Probe Amplifier



The Signal Tracer RF and audio probe using Lm386 integrated circuit is geared towards maintaining preamplifier, power amplifiers and even RF devices.
As a probe of audio signal and RF, can make maintenance of equipment such as amplifiers, preamplifier, radios, car audio, transmitters, recorders, televisions and more. The basic operation is to follow the audio signal to a point where it is not available or is undergoing any changes that should not occur.


LM386 AUDIO AMPLIFIER


Now that we have a little background information on the LM386, let’s start by building a bare bones LM386 amplifier with the minimum amount of components needed to make it work. That way you can compare it to the better sounding one we’ll build later on.
Here’s the schematic:


Tuesday, 31 July 2018

NE555 LM386 İLE MÜZİK KUTUSU YAPIMI VİDEOLU

NE555 LM386 İLE MÜZİK KUTUSU YAPIMI VİDEOLU


Sistem basit ama o kadar güzel bir pcb tasarımı yapılmışki göze çok hoş görünüyor ayrıca çalışmasıda oldukca iyi ne555 frekans ayarı dirençler ile bölünmüş farklı frekanslar farklı tonlama yapıyor ses çıkışı ise lm386 amplifikatör ile yükseltilmiş. Eğlenceli basit bir devre pdf formatında devre şeması, baskı devre ve yerleşim planı var.

Sunday, 29 July 2018

Fiber Optik Kablo İle Ses İletimi

Fiber Optik Kablo İle Ses İletimi


fiber-optik-kablo-ile-ses-iletimi-projesiVerici Devresinin Çalışma Prensibi: Bu devrede ses sinyalini elektrik sinyaline çevirmek için kapasitif mikrofon kullanılmıştır. Mikrofon çıkışındaki mV seviyelerindeki sinyal bc 547’li ön yükseltme devresi ile yükseltildikten sonra op-amp’a uygulanır.Op-amp çıkışındaki sinyal darlington bağlı sürücü transistörün beyzine uygulanarak, lazer ışını modüle edilir. Besleme olarak 5V’luk DC besleme kullanılmıştır.